Mfotarsp, Respond To +Mfotareq Report - Motorola G24 Guide Developer's Manual

+MFOTAREQ: 3
AT+MFOTAREQ
+MFOTAREQ: 3
AT+MFOTARSP=2
OK

+MFOTARSP, Respond to +MFOTAREQ Report

This command is used to send a response to +MFOTAREQ reports.
This command is a basic command.
In MUX mode, this AT command is allowed on DLC2 only.
Command
Type
Set
Test
The following table shows the +MFOTARSP parameters.
<Parameter>
<action>
Example
+MFOTAREQ: 1
AT+MFOTARSP=0
OK
+MFOTAREQ: 2
AT+MFOTARSP=1
OK
+MFOTAREQ: 3
AT+MFOTARSP=2
OK
December 31, 2007
// Request to Upgrade Phone Software
// Postpone the Upgrade operation
Syntax
AT+ MFOTARSP = <OK>
<action>
or:
+CME ERROR:
AT+ MFOTARSP=? + MFOTARSP: (list of <
action>s)
Table 3-178: +MFOTARSP Parameters
Description
0 - start
1 - reject
2- one hour postpone
// Request to begin DM session
// Confirm DM session beginning
// Request to start downloading an Update-Package
// Reject the download operation
// Request to Upgrade Phone Software
// Postpone the Upgrade operation
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
2 - relevant for upgrade
operation only.
Remarks
Remarks
3-269