Mkpd, Auxiliary Keypad Control - Motorola G24 Guide Developer's Manual

UI (User Interface)
Character
U/u
V/v
W/w
X/x
[
]
^
Example
AT+CMER=0,2,0,0,0
OK
AT+CKPD=m //Emulate pressing the MENU button
OK
+CKEV: "M",1 //If +CMER is configured to echo and phone not locked
+CKEV: "M",0
AT+CKPD=[ //Emulate pressing the EXIT button - the left soft-key button
OK
+CKEV: "[",1
+CKEV: "[",0

+MKPD, Auxiliary Keypad Control

This command enables accessories to control the press and release of key presses. If a key is not
supported by a G24, the G24 returns a +CME ERROR: indicating that error 25 (Invalid character)
has occurred.
Only a single key may be pressed at a given time. Sending in a new key press without releasing
the previous key results in the previous key being automatically released.
Command
Type
Set
3-312
Table 3-204: Character Codes (Cont.)
IRA (dec)
85/117
86/118
87/119
88/120
91
93
94
Response/Action
+MKPD=<key>,<state>
AT Commands Reference Manual
Comment (and Known Key Sym-
bols)
Volume up
Down arrow
Pause character
Auxiliary (AUX)
Soft Key Left
Soft Key Right
Up arrow
Remarks
OK
or:
+CME ERROR: <err>
December 31, 2007