Motorola G24 Guide Developer's Manual page 432

GPRS/EDGE
Command
Type
Test
3-348
Syntax
+CGEQMIN=? +CGEQMIN: <PDP_type>, (list of
supported <Traffic class>s) ,(list of
supported <Maximum bitrate UL>s)
,(list of supported <Maximum
bitrate DL>s), (list of supported
<Guaranteed bitrate UL>s), (list of
supported <Guaranteed bitrate
DL>s) ,(list of supported <Delivery
order>s) ,(list of supported
<Maximum SDU size>s) ,(list of
supported <SDU error ratio>s) ,(list
of supported <Residual bit error
ratio>s) ,(list of supported <Delivery
of erroneous SDUs>s) ,(list of
supported <Transfer delay>s) ,(list
of supported <Traffic handling
priority>s)
[<CR><LF>+CGEQMIN:
<PDP_type>, (list of supported
<Traffic class>s) ,(list of supported
<Maximum bitrate UL>s), (list of
supported <Maximum bitrate DL>s)
,(list of supported <Guaranteed
bitrate UL >s), (list of supported
<Guaranteed bitrate DL >s) ,(list of
supported <Delivery order>s) ,(list
of supported <Maximum SDU
size>s) ,(list of supported <SDU
error ratio>s) ,(list of supported
<Residual bit error ratio>s) ,(list of
supported <Delivery of erroneous
SDUs>s) ,(list of supported
<Transfer delay>s) ,(list of
supported <Traffic handling
priority>s)
[...]]
AT Commands Reference Manual
Response/Action Remarks
The test command
returns values supported
as a compound value. If
the MT supports several
PDP types, the parameter
value ranges for each
PDP type are returned on
a separate line.
December 31, 2007