Motorola G24 Guide Developer's Manual page 593

+MIPXOFF
+MIPXON
+MKPD
+MMAD
+MMAR
+MMICG
+MMGL
+MMGR
+MNTFY
+MPCMC
+MPDPM
+MPING
December 31, 2007
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This unsolicited event is sent to
the terminal to stop sending data.
This unsolicited event is sent to
the terminal when the G24 has
free memory in the accumulating
buffer.
This command enables
accessories to control the press
and release of key presses.
This command reads and
monitors digital value from a
specified ADC.
This command changes the status
of an SMS message in the G24
memory from "REC UNREAD"
to "REC READ".
This command handles the
selection of microphone gain
values.
This command displays a list of
SMS messages stored in the G24
memory.
This command enables the user
to read selected SMS messages
from the G24 memory.
This command enables/disables
unsolicited report of NOTIFY
indication arrived from the NW.
This command defines whether
the PCM clock is generated
continuously or not, when
module is in digital audio mode.
This command returns the
collective percentage of memory
used by the phonebook and
datebook in their shared dynamic
memory storage.
This command will allow
verifying IP connectivity to
another remote machine
(computer) by sending one or
more Internet Control Message
Protocol (ICMP) Echo Request
messages.
AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-401
Page 3-402
Page 3-312
Page 3-219
Page 3-125
Page 3-246
Page 3-114
Page 3-118
Page 3-53
Page 3-226
Page 3-85
Page 3-405
Page
A-17