Miau, Ip Addresses Utility - Motorola G24 Guide Developer's Manual

GPRS/EDGE
Operation of this command is flex dependant.
Command
Type
Execute
Note:
Example
AT+MDLC
CONNECT
NO CARRIER

+MIAU, IP Addresses Utility

This command is intended for use in applications utilizing the IP Director feature.
This command is used to set/read the IP addresses for the User MIDlet (UM) and external CPU,
and the port number used by UM for local listen socket.
The set values will be persistent and maintained across power cycles.
Note:
Operation of this command is flex dependant.
Command
Type
Set
Read
3-338
Syntax
AT+MDLC
Testing of the local connection feature can be done using a Windows dialer. To allow this,
the command ATD*98# can be used instead of AT+MDLC, for testing purpose only.
See G24 KJAVA User's Guide (P/N 6802981C50) for additional information regarding
IP Director feature.
Syntax
AT+MIAU=[<UM-IP
-address>]
,[<External-CPU-IP-
address>]
,[<UM-Listen-Socket-
Port>]
AT+MIAU?
AT Commands Reference Manual
Response/Action
OK
or:
ERROR
Response/Action
OK
or:
ERROR
+MIAU: <UM-IP-address>,
<External-CPU-IP-address>,
<UM-Listen-Socket-Port>
Remarks
Remarks
December 31, 2007