Table of Contents
Advertisement
Do not shock the Teach Pendant physically or place any object on Teach
Pendant. A liquid crystal display is used for the Teach Pendant display.
the display is damaged, liquid crystal may leak out. Liquid crystal is harmful.
If it sticks on your skin or clothes, immediately wash your skin and clothes
thoroughly with clean water and soap immediately.
The Teach Pendant must be used within the environmental conditions
described in this manual. This product has been designed and manufactured
strictly for use in a normal indoor environment.
CAUTION
environment that exceeds the conditions may not only shorten the life cycle of
the product but also cause serious safety problems.
Do not disassemble, repair, or modify the Teach Pendant by yourself.
Improper disassembly, repair, or modification of the Teach Pendant may cause
not only improper function of the robot system but also serious safety problems.
Safety-related Requirements
Specific tolerances and operating conditions for safety are contained in the manuals for
the robot, controller and other devices. Be sure to read those manuals as well.
Robot systems safety standard and other examples are given in this chapter. Therefore,
to ensure that safety measures are complete, please refer to the other standards listed as
well.
(Note: The following is only a partial list of the necessary safety standards.)
EN 61000-6-2
EN 61000-6-4
IEC 61131-2
EN ISO 12100-1
EN ISO 12100-2
EN 418
EN 614-1
EN 894-1
EN 894-2
TP1 Rev.5
Electromagnetic compatibility (EMC). Generic standards.
Immunity standard for industrial environments
Electromagnetic compatibility (EMC). Generic standards.
Emission standard for industrial environments
Programmable controllers - Part 2: Equipment requirements
and tests
Safety of machinery - Basic concepts, general principles for
design -- Part 1: Basic terminology, methodology
Safety of machinery - Basic concepts, general principles for
design -- Part 2: Technical principles
Safety of machinery - Emergency stop equipment, functional
aspects - principles for design
Safety of machinery - Ergonomic design principles; part 1:
terminology and general principles
Safety of machinery - Ergonomics requirements for the
design of displays and control actuators; Part 1: General
principles for human interactions with displays and control
actuators
Safety of machinery - Ergonomics requirements for the
design of displays and control actuators; Part 2: Displays
Functions & Installation 1. Safety
Using this product in the
If
5
Advertisement
Table of Contents
