Program Mode - Epson TP1 User Manual

Operation 3. AUTO Mode

3.6 Program Mode

This section indicates settings in the [Program Mode] screen.
Follow the procedure below to display the [Program Mode] screen.
(1) In the [Main Menu] screen, move the cursor to [5 Program Mode...], and press the
(2) The following screen appears.
TIP
TIP
74
<OK> key.
[Program Mode] screen
Move the cursor to the last line and press the <↓> key to display the following
screen.
[Program Mode] screen (next screen)
Menus with "..." at the end have following procedures after selecting the menu and
cannot be executed only by pressing the <OK> key.
When a password is set up, the following screen appears before displaying the
[Program Mode] screen.
Enter the password (1 to 16 characters). Press the <OK> key.
For password setting, refer to Operation 4. Password Setup.
TP1 Rev.5