Epson TP1 User Manual page 53

(4) When a message appears regarding the capacitor charge, leave the power ON for 3
(5) The following screen appears.
TP1 Rev.5
Move the cursor to the joint to calibrate. Press the <→> key to select the joint and
press the <F2> key.
<→> key : Joint selection
<←> key : Joint selection reset
The following screen appears when selection Joint #4 and Joint #3 is selected
automatically.
or more minutes to sufficiently charge the capacitor. Press the <F2> key to display
the following screen.
Operation 2. TEACH Mode
43