2.7.3 Setting Righty / Lefty (E2 Series / G Sereis)
(1) In the [Calibration] screen, move the cursor to "Righty/Lefty", and press the <OK>
(2) The following screen appears. Select one of the point data in the accessible area
(3) The following screen appears. Press the <Motor> key to turn ON the motor.
TP1 Rev.5
key.
that is easy to verify the accuracy for both right and left arm orientations using the
<↑> and <↓> keys and press the <Enter> key.
Press the <F2>key.
Press the <F2> key.
Operation 2. TEACH Mode
57