Table of Contents
Advertisement
3.6.8 Restore System
Restores system files backed up in USB memory to the Controller.
(1) Insert the USB memory into the Controller.
(2) In the [Program Mode] screen, move the cursor to [7 System Restore...], and press
(3) The following screen appears.
(4) Press the <OK> key
(5) The following screen appears. Press the <OK> key.
(6) The following screen appears. Move the cursor to the desired folder.
TP1 Rev.5
the <OK> key.
When you restore the robot name, serial number, and the calibration data with the
basic Controller settings, move the cursor to [Robot name, serial #, calibration] and
press the <→> key.
When you restore the project with the basic Controller settings, move the cursor to
[Project] and press the <→> key.
Press the <Enter> key.
Operation 3. AUTO Mode
89
Advertisement
Table of Contents
