Releasing Brake (Ps Series Only) - Epson TP1 User Manual

Operation 2. TEACH Mode

2.9 Releasing Brake (PS series only)

This section indicates the brake ON / OFF switching for each joint.
(1) Press the <F8> key in the [Jog&Teach] screen.
(2) The following screen appears.
(3) The following screen appears.
66
Move the cursor to "1 Brake" and press the <OK> key.
The following screen appears when the password is set up.
Enter the password (1 to 16 characters) and press the <OK> key.
For password setting, refer to Operation 4. Password Setup.
TP1 Rev.5