Dell Force10 C150 Configuration Manual page 991

All of these tasks can be performed using IPv4 or IPv6 addresses. The examples in this section use IPv4
addresses; IPv6 addresses can be substituted for the IPv4 addresses in all of the examples.
The relevant MIBs for these functions are:
Table 48-3. MIB Objects for Copying Configuration Files via SNMP
MIB Object
copySrcFileType
copySrcFileLocation
copySrcFileName
copyDestFileType
copyDestFileLocation
copyDestFileName
copyServerAddress
OID
.1.3.6.1.4.1.6027.3.5.1.1.1.1.2
.1.3.6.1.4.1.6027.3.5.1.1.1.1.3
.1.3.6.1.4.1.6027.3.5.1.1.1.1.4
.1.3.6.1.4.1.6027.3.5.1.1.1.1.5
.1.3.6.1.4.1.6027.3.5.1.1.1.1.6
.1.3.6.1.4.1.6027.3.5.1.1.1.1.7
.1.3.6.1.4.1.6027.3.5.1.1.1.1.8
Object Values Description
1 = FTOS file Specifies the type of file to copy from.
2 = running-config Valid values are:
3 = startup-config
• If the copySrcFileType is
running-config or startup-config,
the default copySrcFileLocation is
flash.
• If the copySrcFileType is a binary
file, the copySrcFileLocation and
copySrcFileName must also be
specified.
1 = flash Specifies the location of source file.
2 = slot0
• If the copySrcFileLocation is FTP
3 = tftp or SCP, copyServerAddress,
copyUserName, and
4 = ftp
copyUserPassword must be
5 = scp
specified.
Path (if file is not in Specifies name of the file.
current directory)
• If copySourceFileType is set to
and filename. running-config or startup-config,
copySrcFileName is not required.
1 = FTOS file Specifies the type of file to copy to.
2 = running-config
• If the copySourceFileType is
3 = startup-config running-config or startup-config,
the default copyDestFileLocation is
flash.
• If the copyDestFileType is a binary
the copyDestFileLocation and
copyDestFileName must be
specified.
1 = flash Specifies the location of destination
2 = slot0 file.
3 = tftp
• If the copyDestFileLocation is FTP
4 = ftp or SCP, copyServerAddress,
copyUserName, and
5 = scp
copyUserPassword must be
specified.
Path (if file is not in Specifies the name of destination file.
default directory)
and filename.
IP Address of the The IP address of the server.
server
• If the copyServerAddress is
specified so must copyUserName,
and copyUserPassword.
Simple Network Management Protocol | 991