Interface Loopback; Ip Msdp Peer; Router Ospf - Dell Force10 C150 Configuration Manual

Ftos configuration guide ftos 8.4.2.7 e-series terascale, c-series, s-series (s50/s25)
Hide thumbs Also See for Force10 C150:
Table of Contents

Advertisement

Figure 28-18. MSDP with Anycast RP
(10.11.4.2, 239.0.0.1), uptime 00:00:52, expires 00:03:20, flags:
Incoming interface: GigabitEthernet 2/1, RPF neighbor 0.0.0.0
Outgoing interface list:
AS X
Area 0
1/21
1/2
R1
RP1
1/1
(*, 239.0.0.1), uptime 00:00:09, expires 00:00:00, RP 192.168.0.1, flags: SCJ
Incoming interface: Null, RPF neighbor 0.0.0.0
Outgoing interface list:
(10.11.4.2, 239.0.0.1), uptime 00:00:05, expires 00:03:25, flags: CTM
Incoming interface: GigabitEthernet 1/21, RPF neighbor 10.11.1.21
Outgoing interface list:
PC 1
Receiver
To configure Anycast RP:
Step
Task
1
In each routing domain that will have multiple RPs serving a
group, create a loopback interface on each RP serving the
group with the same IP address.
2
Make this address the RP for the group.
3
In each routing domain that will have multiple RPs serving a
group, create another loopback interface on each RP serving
the group with a unique IP address.
4
Peer each RP with every other RP using MSDP, specifying the
unique loopback address as the connect-source.
5
Advertise the network of each of the unique loopback
addresses throughout the network.
GigabitEthernet 2/11 Forward/Sparse 00:00:50/00:02:40
GigabitEthernet 2/31 Forward/Sparse 00:00:50/00:02:40
PC 2
Source
2/1
R2
RP2
2/11
GigabitEthernet 1/1 Forward/Sparse 00:00:09/Never
GigabitEthernet 1/1 Forward/Sparse 00:00:09/Never
FTA
PC 3
Receiver
4/1
4/31
3/21
3/41
R3
RP3
(*, 239.0.0.1), uptime 00:00:14, expires 00:03:16, RP 192.168.0.3, flags: S
Incoming interface: Null, RPF neighbor 0.0.0.0
Outgoing interface list:
GigabitEthernet 3/41 Forward/Sparse 00:00:14/00:03:16
(10.11.4.2, 239.0.0.1), uptime 00:00:14, expires 00:03:17, flags: TM
Incoming interface: GigabitEthernet 3/21, RPF neighbor 10.11.0.23
Outgoing interface list:
GigabitEthernet 3/41 Forward/Sparse 00:00:14/00:03:16
Command Syntax

interface loopback

ip pim rp-address
interface loopback

ip msdp peer

network
AS Y
Area 0
R4
(*, 239.0.0.1), uptime 00:00:23, expires 00:00:00, RP 192.168.0.3, flags: SCJ
Incoming interface: GigabitEthernet 4/31, RPF neighbor 10.11.6.34
Outgoing interface list:
GigabitEthernet 4/1 Forward/Sparse 00:00:23/Never
(10.11.4.2, 239.0.0.1), uptime 00:00:23, expires 00:03:18, flags: CT
Incoming interface: GigabitEthernet 4/31, RPF neighbor 10.11.6.34
Outgoing interface list:
GigabitEthernet 4/1 Forward/Sparse 00:00:23/Never
Command Mode
CONFIGURATION
CONFIGURATION
CONFIGURATION
CONFIGURATION

ROUTER OSPF

Multicast Source Discovery Protocol | 633

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents