Debugging Ftsa - Dell Force10 C150 Configuration Manual

Figure 16-17. FTSA Type 5 Message for an Excessive CRC-error Condition
---------------------------------Message Body------------------------------------------
<AgentInfo>
<messagetype>Type - 5</messagetype>
<time>21:10:04.678 UTC Tue Mar 10 2009</time>
<serialnum>0036232
<hostname>R6_E300</hostname>
<messagenum>0</messagenum>
</AgentInfo>
---------------------------------Message Attachment------------------------------------
<action_list_message>
<AgentInfo>
<messagetype>Type - 5</messagetype>
<time>21:10:04.686 UTC Tue Mar 10 2009</time>
<serialnum>0036232
</AgentInfo>
<contact_info>
<F10_info>
<policy_name>crcerror</policy_name>
</F10_info>
<action_list_name>crcerror</action_list_name>
<test_list_match>
<match>
<test_condition>interface-crc</test_condition>
<test_value>The current value 501 is greater than the configured value 500</
test_value>
</match>
</test_list_match>
<content>
<item>
<item_name>show int gig 1/2 | grep CRC</item_name>
<item_time>19:01:07.368 UTC Tue Mar 10 2009</item_time>
<item_output>
show int gig 1/2 | grep CRC
501 CRC, 0 overrun, 501 discarded
R6_E300#
</item_output>
</item>
</content>
</action_list_message>

Debugging FTSA

Display FTSA messages using the
</serialnum>
</serialnum>
debug call-home
command from EXEC Privilege mode.
Force10 Service Agent | 371