Dell Force10 C150 Configuration Manual page 672

To display the current configuration of Layer 2 multicast switching on a router, enter the
mac-address-table static multicast
mode. Static MAC addresses configured for Layer 2 multicast forwarding with an associated VLAN and
assigned output ports are displayed as shown in
Figure 30-4. show mac-address-table static multicast Command Output
FTOS# show mac-address-table static multicast
VlanId Mac Address
10 01:00:5e:01:01:01
11 01:00:5e:01:01:02
12 01:00:5e:01:01:01
Figure 30-5. show mac-address-table static multicast vlan Command Output
FTOS# show mac-address-table static multicast vlan 10
VlanId Mac Address
10 01:00:5e:01:01:01
To display the number of static multicast MAC addresses in use for all VLANs on a router, enter the
mac-address-table static multicast count
Figure 30-6. show mac-address-table static multicast count Command Example
FTOS#show mac-address-table static multicast count
Figure 30-7. show mac-address-table static multicast count vlan Command Example
FTOS#show mac-address-table static multicast count vlan 10
672 | Multicast Features
[ |
vlan vlan-id
multicast-mac-address
Figure
Type State L2MCIndex
static Active
static Active
static Inactive
The state of a static multicast MAC address is inactive if the
associated VLAN has not been configured.
Type State L2MCIndex
static Active
[ ]
vlan vlan-id
command in EXEC mode.
[
vlan vlan-id
30-4.
Interfaces
0 Gi 1/2,
Gi 2/47
1 Po 10
0
Interfaces
0 Gi 1/2,
Gi 2/47
show
]]
command in EXEC
show