Configure The Enable Password Command; Configure Custom Privilege Levels - Dell Force10 C150 Configuration Manual

Configure the enable password command

To configure FTOS, you must use the
entering the command, FTOS requests that you enter a password. Privilege levels are not assigned to
passwords, rather passwords are assigned to a privilege level. A password for any privilege level can
always be changed. To change to a different privilege level, enter the
privilege level. If you do not enter a privilege level, the default level 15 is assumed.
To configure a password for a specific privilege level, use the following command in the
CONFIGURATION mode:
Command Syntax
enable password
[
encryption-mode
To view the configuration for the
EXEC Privilege mode.
In custom-configured privilege levels, the
level you entered FTOS, you can enter the

Configure custom privilege levels

In addition to assigning privilege levels to the user, you can configure the privilege levels of commands so
that they are visible in different privilege levels. Within FTOS, commands have certain privilege levels.
With the privilege command, the default level can be changed or you can reset their privilege level back to
the default.
• Assign the launch keyword (for example,
• If you assign only the first keyword to the privilege level, all commands beginning with that keyword
are also assigned to the privilege level. If you enter the entire command, the software assigns the
privilege level to that command only.
922 | Security
Command Mode
level level
[ ] CONFIGURATION
]
password
enable secret
enable
command to enter the EXEC Privilege level 15. After
Purpose
Configure a password for a privilege level. Configure the
optional and required parameters:
level level:
•
levels.
•
encryption-type:
text.
• password:
To change only the password for the enable command,
configure only the
command, use the
enable
command is always available. No matter what privilege
enable 15
command to access and configure all CLI.
configure
) for the keyword's command mode.
enable
command, followed by the
Specify a level 0 to 15. Level 15 includes all
Enter 0 for plain text or 7 for encrypted
Enter a string.
parameter.
password
show running-config
command in the