Dell Force10 C150 Configuration Manual page 503

Figure 22-7 illustrates the
Figure 22-7. Command Example: show
FTOS#show ipv6 route
Codes: C - connected, L - local, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
Gateway of last resort is not set
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
C 2001::/64 [0/0]
Direct, Gi 1/1, 00:28:49
Figure 22-8 illustrates the
Figure 22-8. Command Example:
FTOS#show ipv6 route summary
Route Source
connected
static
Figure 22-9 illustrates the
Figure 22-9. Command Example:
FTOS#show ipv6 route static
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
S 8888:9999:5555:6666:1111:2222::/96 [1/0]
S 9999:9999:9999:9999::/64 [1/0]
show ipv6 route
command output.
ipv6 route
show ipv6 route
summary command output.
show ipv6 route summary
Active Routes Non-active Routes
5 0
0 0
show ipv6 route static
command output.
show ipv6 route static
via 2222:2222:3333:3333::1, Gi 9/1, 00:03:16
via 8888:9999:5555:6666:1111:2222:3333:4444, 00:03:16
IPv6 Addressing | 503