Configuring Request Identity Re-transmissions
If the authenticator sends a Request Identity frame, but the supplicant does not respond, the authenticator
waits 30 seconds and then re-transmits the frame. The amount of time that the authenticator waits before
re-transmitting and the maximum number of times that the authenticator re-transmits are configurable.
Note: There are several reasons why the supplicant might fail to respond; the supplicant might have been
booting when the request arrived, there might be a physical layer problem, or the supplicant might not be
802.1x capable.
To configure the amount of time that the authenticator waits before re-transmitting an EAP Request
Identity frame:
Step
Task
1
Configure the amount of time that the authenticator
waits before re-transmitting an EAP Request Identity
frame.
To configure a maximum number of Request Identity re-transmissions:
Step
Task
1
Configure a maximum number of times that a Request
Identity frame can be re-transmitted by the
authenticator.
Figure 7-7
Request Identity frame after 90 seconds and re-transmits a maximum of 10 times.
Configuring a Quiet Period after a Failed Authentication
If the supplicant fails the authentication process, the authenticator sends another Request Identity frame
after 30 seconds by default, but this period can be configured.
Note: The quiet period (
the Request Identity Re-transmit interval (
To configure the quiet period after a failed authentication:
Step
Task
1
Configure the amount of time that the authenticator
waits to re-transmit a Request Identity frame after a
failed authentication.
114
|
802.1X
shows configuration information for a port for which the authenticator re-transmits an EAP
dot1x quiet-period
Command Syntax
dot1x tx-period number
Range: 1-31536000 (1 year)
Default: 30
Command Syntax
dot1x max-eap-req number
Range: 1-10
Default: 2
) is an transmit interval for after a failed authentication where as
) is for an unresponsive supplicant.
dot1x tx-period
Command Syntax
dot1x quiet-period seconds
Range: 1-65535
Default: 60
Command Mode
INTERFACE
Command Mode
INTERFACE
Command Mode
INTERFACE