Display Ethernet Cfm Statistics - Dell Force10 C150 Configuration Manual

Three values are given within the trap messages: MD Index, MA Index, and MPID. You can reference
these values against the output of
local mep
.
FTOS#show ethernet cfm maintenance-points local mep
-------------------------------------------------------------------------------
MPID
-------------------------------------------------------------------------------
100
FTOS(conf-if-gi-0/6)#do show ethernet cfm domain
Domain Name: My_Name
MD Index: 1
Level: 0
Total Service: 1
Services
MA-Index
1
Domain Name: Your_Name
MD Index: 2
Level: 2
Total Service: 1
Services
MA-Index
1

Display Ethernet CFM Statistics

Task
Display MEP CCM statistics.
FTOS# show ethernet cfm statistics
Domain Name: Customer
Domain Level: 7
MA Name: My_MA
MPID: 300
CCMs:
Transmitted:
LTRs:
Unexpected Rcvd:
LBRs:
Received:
Received Bad MSDU:
Transmitted:
show ethernet cfm domain
Domain Name Level
MA Name VLAN
cfm0 7
test0 10
MA-Name VLAN
test 0
MA-Name VLAN
test 100
Command Syntax
show ethernet cfm statistics
vlan-id vlan-id mpid mpid
1503
show ethernet cfm maintenance-points
and
Type Port
Dir MAC
MEP Gi 4/10
DOWN 00:01:e8:59:23:45
CC-Int
1s
CC-Int
1s
domain
[ { name
RcvdSeqErrors:
0
0 Rcvd Out Of Order:
0
0
CCM-Status
Enabled
X-CHK Status
enabled
X-CHK Status
enabled
Command Mode
| level } EXEC Privilege
0
0
802.1ag | 91