Ipv6 Neighbor Discovery - Dell Force10 C150 Configuration Manual

Path MTU (Maximum Transmission Unit) defines the
transmission path without suffering fragmentation.
messages to discover the largest MTU along the path from source to destination and avoid the need to
fragment the packet.
The recommended MTU for IPv6 is 1280. Greater MTU settings increase processing efficiency because
each packet carries more data while protocol overheads (headers, for example) or underlying per-packet
delays remain fixed.
Figure 22-2. MTU Discovery Path
Source
MTU = 1600
Packet (MTU = 1600)
ICMPv6 (Type 2)
Use MTU = 1400
Packet (MTU = 1400)
ICMPv6 (Type
Use MTU = 1200
Packet (MTU = 1200)

IPv6 Neighbor Discovery

IPv6 NDP is supported on platforms
Neighbor Discovery Protocol (NDP) is a top-level protocol for neighbor discovery on an IPv6 network. In
lieu of ARP, NDP uses "Neighbor Solicitation" and "Neighbor Advertisement" ICMPv6 messages for
determining relationships between neighboring nodes. Using these messages, an IPv6 device learns the
link-layer addresses for neighbors known to reside on attached links, quickly purging cached values that
become invalid.
With ARP, each node broadcasts ARP requests on the entire link. This approach causes unnecessary
processing by uninterested nodes. With NDP, each node sends a request only to the intended destination
via a multicast address with the unicast address used as the last 24 bits. Other hosts on the link do not
participate in the process, greatly increasing network bandwidth efficiency.
Router A
MTU = 1400
2)
Packet Received
c e s
largest packet size that can traverse a
Path MTU for IPv6 uses ICMPv6 Type-2
Router B
MTU = 1200
Destination
IPv6 Addressing | 493