Dell Force10 C150 Configuration Manual page 742

To display the IPsec security associations (SAs) used on OSPFv3 interfaces, enter the following command:
Command Syntax
show crypto ipsec sa ipv6
[ interface interface ]
742 | Open Shortest Path First (OSPFv2 and OSPFv3)
Command Mode Usage
EXEC Privilege Displays security associations set up for OSPFv3 links in IPsec
authentication and encryption policies on the router.
To display information on the SAs used on a specific interface,
enter interface interface, where interface is one of the
following values:
For a 1-Gigabit Ethernet interface, enter
GigabitEthernet slot/port.
For a Port Channel interface, enter port-channel number. Valid
port-channel numbers (on an E-Series TeraScale):
1 to 255.
For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet
slot/port.
For a VLAN interface, enter vlan vlan-id.
Valid VLAN IDs: 1 to 4094