Asus DS300j G2 Series User Manual page 129

r l
eleAsing the ock
1. From the Main Menu, highlight Subsystem Management and press Enter .
2. Highlight Lock Management and press Enter .
3. Highlight Unlock and press Enter .
r l
eleAsing A ock set by Another user
To release somebody else's lock:
1. From the Main Menu, highlight Subsystem Management and press Enter .
2. Highlight Lock Management and press Enter .
3. Highlight Force Unlock and press the Spacebar to change to Yes .
4. Highlight Unlock and press Enter .
S S D t (clu)
ettInG ubSyStem ate anD Ime
Use this screen to make Date and Time settings:
1. From the Main Menu, highlight Subsystem Management and press Enter .
2. Highlight Modify System Date & Time and press Enter .
3. Highlight the System Date or System Time setting.
4. Press the backspace key to erase the current value.
5. Type in a new value.
6. Press Control-A to save your settings.
m ntP S (clu)
akInG ettInGS
After you have made Network Time Protocol (NTP) settings, the ASUS DS300f G2 subsystem synchronizes with
a NTP server.
• At startup
• Every night
• When you synchronize manually
To make NTP settings for the subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter .
2. Highlight NTP Management and press Enter .
123
3. Highlight NTP Settings and press Enter .
4. Make the following settings as required:
• Highlight NTP Service and press the spacebar to toggle between Enabled and Disabled .
• Highlight Time Server (1) , Time Server (2) , or Time Server (3) and type a server name.
Example: 0.us.pool.ntp.org
You can have up to 3 NTP servers.
• Highlight Time Zone and press the spacebar to toggle through GMT, GMT+, and GMT-.
For GMT+ and GMT-, type the hour from 0:00 to 13:00 GMT for your time zone.
• Highlight Daylight Savings Time and press the spacebar to toggle between Enable and Disable .
If Daylight Savings Time is Enabled, highlight the Start Month and End Month and enter a number from
1 to 12.
Then highlight the Week and Day and toggle to make your choices.
5. Press Control-A to save your settings.
Notes
The NTP server name shown is an example only. You must find and enter your local NTP server name.
GMT is the older designation for UTC.
S ntP S (clu)
ynchronIzInG wIth a erver
The ASUS DS300f G2 subsystem automatically synchronizes with a NTP server every night and a startup. You
have the option of synchronizing manually at any time.
To manually synchronize the ASUS DS300f G2 with a NTP server:
1. From the Main Menu, highlight Subsystem Management and press Enter .
2. Highlight NTP Management and press Enter .
3. Highlight Start Time Sync and press Enter .
4. Press Y to confirm.
To verify, check Last Synchronization Time and Last Synchronization Result.
DS300f G2 Series User Manual