5. Highlight each of the following and press the backspace key to erase the current value, then type the new
value.
• IP Address
• Subnet Mask
• Default Gateway IP Address
• DNS Server IP Address
6. Press Control-A to save your settings.
m
m
m
S
akInG
aIntenance
oDe
ettInGS
Each controller has its own IP addresses for access when the controller goes into maintenance mode. For more
information, see "Maintenance Mode" on page <?>.
Before you change settings, please see "About IP Addresses" on page 36.
M
A
s
Aking
utoMAtic
ettings
1. From the Main Menu, highlight Network Management and press Enter .
2. Highlight Maintenance Mode Network Configuration and press Enter .
3. Highlight the controller (CId 1 or 2) and protocol family (IPv4 or IPv6) you want and press Enter .
4. Highlight DHCP and press the spacebar to toggle to Enabled .
5. Press Control-A to save your settings.
M
M
s
Aking
AnuAl
ettings
1. From the Main Menu, highlight Network Management and press Enter .
2. Highlight Maintenance Mode Network Configuration and press Enter .
3. Highlight the controller (CId 1 or 2) and protocol family (IPv4 or IPv6) you want and press Enter .
4. Highlight DHCP and press the spacebar to toggle to Disabled .
5. Highlight each of the following and press the backspace key to erase the current value, then type the new
value.
• IP Address
• Subnet Mask
• Default Gateway IP Address
• DNS Server IP Address
6. Press Control-A to save your settings.
143
(clu)
M
f
C
anaGInG
Ibre
hannel
The Fibre Channel Management option appears only with ASUS DS300f G2 Fibre Channel models. Fibre Channel
Management includes the following functions:
• "Viewing Node Information (CLU)" on page 143
• "Viewing Fibre Channel Port Information" on page 143
• "Making Fibre Channel Port Settings (CLU)" on page 144
• "Viewing Fibre Channel Port Statistics (CLU)" on page 144
• "Viewing SFP Information (CLU)" on page 144
• "Viewing Fibre Channel Initiators (CLU)" on page 145
Also see: "Adding an FC Initiator" on page <?> and "Deleting an FC Initiator" on page <?>
v
n
I
(clu)
IewInG
oDe
nformatIon
These functions affect both ASUS DS300f G2 Fibre Channel ports.
1. From the Main Menu, highlight Fibre Channel Management and press Enter .
2. Highlight Fibre Channel Node and press Enter .
Node information appears. There are no user settings on this screen.
v
f
c
P
I
IewInG
Ibre
hannel
ort
nformatIon
To view Fibre Channel port information:
1. From the Main Menu, highlight Fibre Channel Management and press Enter .
2. Highlight Fibre Channel Ports and press Enter .
Highlight the port you want and press Enter .
DS300f G2 Series User Manual
C
(Clu)
onneCtIons