• LUN Affinity – If you choose Active-Active redundancy.
See "Making Controller Settings" on page 86 or page 216.
Note
The ASUS DS300f G2 subsystem boots its
RAID controllers sequentially. With a second
controller installed, your subsystem takes
about a minute longer to boot. This condition is
normal.
D
c
Sata D
ual
ontrollerS anD
rIveS
If your ASUS DS300f G2 subsystem has SATA disk drives installed, you must install a SAS-to-SATA adapter on
each of the SATA drives.
Without the SAS-to-SATA adapter, SATA drives display a red X
Obtain SAS-to-SATA adapters from ASUS Storage Technology at http://www.ASUS Storage.com.
SAS drives do not require adapters.
Also see "Installing Physical Drives" on page 16 and "Contacting Technical Support" on page <?>.
234
icon and Not Usable status.
DS300f G2 Series User Manual