Enu; Ime S Ettings - Asus DS300j G2 Series User Manual

a clu q S m
cceSSInG the uIck etuP

enu

To access the Quick Setup menu in the command line utility:
1. At the administrator@cli> prompt, type
menu
The CLU main menu appears. See Figure 3.
Figure 3 - 1: CLU main menu
2. Highlight Quick Setup and press Enter .
The first Quick Setup screen enables you to make Date and Time settings.
42
and press Enter .
m S D t S
akInG ubSyStem ate anD Ime
To set the subsystem date and time:
1. Press the arrow keys to highlight System Date.
2. Press the backspace key to erase the current date.
3. Type the new date.
4. Follow the same procedure to set the System Time.
5. Press Control-A to save these settings and move to the Management Port settings screen.
v m P S
Irtual anaGement ort ettInGS
M v M P s – A
Aking irtuAl AnAgeMent ort ettings
Automatic settings require a DHCP server on your network. DHCP is currently supported on IPv4 only.
Under Quick Setup, the Management Port IPv4 settings screen follows the System Date and Time settings
screen.
To enable automatic management port settings:
1. Press the arrow keys to highlight DHCP.
2. Press the spacebar to toggle to Enable.
3. Press Control-A to save these settings and move to the Management Port IPv6 settings screen.
DS300f G2 Series User Manual
ettInGS
utoMAticAlly