Asus DS300j G2 Series User Manual page 159

• Highlight Ping Through Controller ID and choose a controller (1 or 2)
• Highlight Ping Through Port ID and choose a port number (1 to 4)
To change a value, highlight the item, press Backspace to delete the current value and type a new value.
4. Highlight Ping and press Enter .
The results of the ping are displayed on the iSCSI Ping screen.
v l ScSI t (clu)
IewInG a ISt of I runkS
A trunk is the aggregation of two or more iSCSI ports to increase bandwidth.
To view a list of iSCSI trunks:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight Trunk and press Enter .
The list of iSCSI Trunks displays.
• ID – ID number of the trunk. Starts at 1.
• CtrlId – RAID controller ID, 1 or 2
• Master Port – One of the four physical ports on the RAID controller
• Slave Ports – Any or all of the remaining physical ports on the same RAID controller
• Failed Ports – A slave port that has no iSCSI data connection.
• State – Optimal, Sub-Optimal or Failed. Identify and correct the failed iSCSI ports.
a ScSI t (clu)
DDInG I runkS
Ports must be enabled to add them to a trunk. See "Making iSCSI Port Settings (CLU)" on page 148. ASUS
DS300f G2 supports a maximum of eight trunks.
You cannot use an iSCSI port that has portals configured to it. See "Viewing a List of iSCSI Portals (CLU)" on
page 148 and "Deleting iSCSI Portals (CLU)" on page 150.
To add an iSCSI Trunk:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight Trunk and press Enter .
3. Highlight Create New Trunk and press Enter .
4. Enter information as required:
• Highlight Controller and type the controller you want (1 or 2).
153
• Highlight Master Port and type the port number you want (1 to 4).
• Highlight Slave Ports and type the port number you want.
For multiple ports, separate the numbers with a comma.
You can choose any or all port numbers except the Master Port number.
5. Highlight Save Trunk and press Enter .
The new trunk appears in the list.
You can add up to 8 trunks. After you add a trunk, you can assign it to a portal. See"Adding iSCSI Portals
(CLU)" on page 149.
m ScSI t S (clu)
akInG I runk ettInGS
To make trunk settings:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight Trunk and press Enter .
3. Highlight the trunk you want and press Enter .
4. Enter information as required:
• Highlight Controller and type the controller you want (1 or 2).
• Highlight Master Port and type the port number you want (1 to 4).
• Highlight Slave Ports and type the port number you want.
For multiple ports, separate the numbers with a comma.
You can choose any or all port numbers except the Master Port number.
5. Highlight Save Settings and press Enter .
D ScSI t (clu)
eletInG I runkS
Before you can delete a trunk, you must delete any portals configured on it. See "Deleting iSCSI Portals (CLU)"
on page 150.
To delete an iSCSI trunk:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight Trunk and press Enter .
3. Highlight the trunk you want to delete and press the Spacebar to mark it.
4. Highlight Delete Marked Trunks and press Enter .
5. Press Y to confirm.
DS300f G2 Series User Manual