Asus DS300j G2 Series User Manual page 52

w - a c
IzarD utomatIc onfIGuratIon
When you choose the Automatic option, the following parameters appear on the screen:
• – The number of logical drives, number of physical drives, ID of each physical drive, configurable
Disk Arrays
capacity, and the media type (hard disk drives or solid state drives).
• – The ID numbers of the logical drives, their RAID levels, capacity, sector size, and stripe
Logical Drives
size.
• – The ID numbers of the logical drives, type (global or dedicated) revertible option (enabled
Spare Drives
or disabled) and media type. A hot spare drive is created for all RAID levels except RAID 0, when five or
more unconfigured physical drives are available
If you do NOT accept these parameters, use the
If you accept these parameters, click the
Submit
The new disk array appears in the Disk Array List on the Storage tab, Disk Array option.
46
or option to create your disk array.
Express Advanced
button, and then click the button.
Finish
Figure 3 - 5: Automatic Configuration menu
DS300f G2 Series User Manual