G2 With The Cli; Ime S Ettings - Asus DS300j G2 Series User Manual

a mac a
cceSSInG the DDreSS In the
To access the MAC address in the CLU:
1. At the CLI command prompt, type menu and press Enter .
The CLU screen appears.
2. Highlight Network Management and press Enter .
3. Highlight IPv4 and press Enter .
The following information displays:
Active Controller Id: 1
Max Supported Speed : 1000Mbps Link Status
Protocol Family : IPv4
Status : Enabled
MAC Address : 00:01:55:61:18:65
DHCP : Disabled
IP Address : 10.0.0.1
Subnet Mask : 0.0.0.0
Gateway IP Address : 0.0.0.0
DNS Server IP Address : 0.0.0.0
37
clu
Port Id : 1
: Up
s - asus ds300
ettInG up
Setting up the ASUS DS300f G2 in the CLI includes these actions:
• "Making Subsystem Date and Time Settings" on page 37
• "Virtual Management Port Settings" on page 38
• "Making Virtual Management Port Settings – Automatically" on page 38
• "Making Virtual Management Port Settings – Manually under IPv4" on page 38
• "Making Virtual Management Port Settings – Manually under IPv6" on page 38
• "Maintenance Mode Settings" on page 39
• "Making Maintenance Mode Settings – Automatically" on page 39
• "Making Maintenance Mode Settings – Manually under IPv4" on page 40
• "Making Maintenance Mode Settings – Manually under IPv6" on page 40
m S D t S
akInG ubSyStem ate anD Ime ettInGS
To set the subsystem date and time:
date -a mod -d
1. Type and the date in yyyyy/mm/dd format then press Enter .
administrator@cli> date -a mod -d 2011/03/25
date -a mod -t
2. Type and the time in hh:mm:ss format, then press Enter .
administrator@cli> date -a mod -t 14:50:05
You can combine date and time settings, such as:
administrator@cli> date -a mod -d 2011/03/25 -t 14:50:05
DS300f G2 Series User Manual
G2 ClI
f wIth the