S Hutdown; Managing Raid Controllers - Asus DS300j G2 Series User Manual

S D S
huttInG own the ubSyStem
This function shuts down the RAID subsystem without restarting it.
To shutdown the subsystem:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Choose the option to apply the shutdown to the
4. Click the Shutdown/Restart button.
5. Click the Shutdown button.
6. Type the word " " in the field provided.
confirm
7. Click the Confirm button.
When the controller shuts down, your ASUS Storage Management connection is lost.
8. Wait at least two minutes.
Important
If your RAID subsystem manages JBOD expansion units, you must follow the proper startup
procedure.
r S S
eStartInG the ubSyStem after a
To start the RAID subsystem:
1. Press the Power button on the front left side of the device being restarted.
2. Wait at least two minutes.
3. Open your browser and log into ASUS Storage Management.
If you cannot log in immediately, wait 30 seconds and try again.
58
Subsystem , Controller 1 only or Controller 2
hutDown
M raId C
anaGInG
RAID controller management includes:
• "Viewing Controller Information" on page 58
• "Making Controller Settings" on page 59
• "Locating a Controller" on page 60
only
• "Viewing the Flash Image Information" on page 60
• "Viewing Battery Information" on page 62
• "Reconditioning a Battery" on page 62
• "Silencing the Buzzer" on page 63
v c I
IewInG ontroller
To view controller information:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the controller you want, then click the View button.
Controller information includes:
• Controller ID
• Readiness Status
• Power On Time
• LUN Mapping method
• Serial Number
• Hardware Revision
• Cache Usage – Percentage
• Boot Loader Version
• Firmware Build Date
• Software Build Date
ontrollers
nformatIon
• Alias – If assigned *
• Operational Status
• SCSI Protocol Supported
• Part Number
• WWN – World Wide Name
• Dirty Cache Usage – Percentage
• Firmware Version
• Software Version
DS300f G2 Series User Manual