Ibre C Hannel Das - Asus DS300j G2 Series User Manual

f c DaS
Ibre hannel
Important
For a list of supported HBAs, switches, and SFP transceivers, download the latest
compatibility list from ASUS Storage support:
http://www.ASUS Storage.com/support/.
Fibre Channel direct attached storage (DAS) requires:
• An FC HBA card in the host PC or server
• An SFP transceiver for each connected FC port on the subsystem
• A network switch
fc dAs d P
AtA Ath
To establish the data path:
1. Connect an FC cable between a data port on the left RAID controller and the FC HBA card in your host PC
or server.
See "Figure 2 - 11: FC DAS data and management connections" on page 20
2. Connect an FC cable between a data port on the right RAID controller and the FC HBA card in your host PC
or server.
M P
AnAgeMent Ath
To establish the management path:
1. Connect Ethernet cables between the Management ports of both RAID controllers and the network switch.
See "Figure 2 - 11: FC DAS data and management connections" on page 20
2. Connect an Ethernet cable between the network port on the host PC or server and the network switch.
20
The ASUS DS300f G2 subsystem is shown with SFP transceivers installed.
Figure 2 - 11: FC DAS data and management connections
DS300f G2 Series User Manual