Starting Up After Shutdown - Asus DS300j G2 Series User Manual

5. Highlight Submit and press Enter .
A warning message appears.
6. Press Y to continue.
7. The subsystem will then turn off the system power one after another.
169
s u a s
tartInG p fter hutdown
There are two methods for shutting down the subsystem. Choose one of the following procedures:
• "Starting up the ASUS DS300f G2 – Telnet Connection" on page 169
• "Starting up the ASUS DS300f G2 – SSH Connection" on page 169
• "Starting up the ASUS DS300f G2 – Serial Connection" on page 170
S aSuS DS300 G2 – t
tartInG uP the f
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side.
2. Wait about two minutes.
3. Establish a Telnet connection to the ASUS DS300f G2.
See Making a Telnet Connection.
If you cannot log in, wait 30 seconds and try again.
4. Type menu and press Enter to open the CLU.
S aSuS DS300 G2 – SSh c
tartInG uP the f
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side.
2. Wait about two minutes.
3. Establish a SSH connection to the ASUS DS300f G2.
See Making a SSH Connection.
If you cannot log in, wait 30 seconds and try again.
4. Type menu and press Enter to open the CLU.
DS300f G2 Series User Manual
c
elnet onnectIon
onnectIon