G2 With The Clu - Asus DS300j G2 Series User Manual

3. To verify the settings, at the command prompt, type net -a list -m and press Enter .
The following information displays:
administrator@cli> net -a list -m
---------------------------------------------------------------------------
CtrlId: 1 Port: 1
ProtocolFamily: IPv4(Enabled)
IP:
10.0.0.2
IPMask: 255.0.0.0
MAC: 00:01:55:30:65:E9
DNS: 0.0.0.0
Gateway: 0.0.0.0
CtrlId: 1 Port: 1
ProtocolFamily: IPv6(Enabled)
IP: 2001:0db8:85a3:0000:0000:8a2e:0370:7336
IPMask: 001:0db8:fedc:ba98:7654:3210:0246:8acf
MAC: 00:01:55:30:65:E9
DNS: 2001:0db8:85a3:0000:0000:8a2e:0370:7001
Gateway: 2001:0db8:85a3:0000:0000:8a2e:0370:7002
CtrlId: 2 Port: 1
ProtocolFamily: IPv4(Enabled)
IP: 10.0.0.3
IPMask: 0.0.0.0
MAC: 00:01:55:30:65:E9
DNS: 0.0.0.0
Gateway: 0.0.0.0
CtrlId: 2 Port: 1
ProtocolFamily: IPv6(Disabled)
IP: 2001::3
IPMask: ffff::
MAC: 00:01:55:30:65:D7
DNS: ::
Gateway: ::
4. Repeat steps 1, 2, and 3 above but change -c 1 (controller 1) to -c 2 (controller 2).
This completes management port and maintenance mode setup.
41
DHCP: Disabled
DHCP: Disabled
DHCP: Disabled
DHCP: Disabled
s - asus ds300
ettInG up
Setting up the ASUS DS300f G2 in the CLU includes these actions:
• "Accessing the CLU Quick Setup Menu" on page 42
• "Making Subsystem Date and Time Settings" on page 42
• "Virtual Management Port Settings" on page 42
• "Making Virtual Management Port Settings – Automatically" on page 42
• "Viewing Virtual Management Port Settings" on page 43
• "Making Virtual Management Port Settings – Manually under IPv4" on page 43
• "Making Virtual Management Port Settings – Manually under IPv6" on page 43
• "Maintenance Mode Settings" on page 43
• "Making Maintenance Mode Settings – Automatically" on page 43
• "Making Maintenance Mode Settings – Manually under IPv4" on page 43
• "Making Maintenance Mode Settings – Manually under IPv6" on page 44
• "Exiting the CLU" on page 44
DS300f G2 Series User Manual
G2 Clu
f wIth the