Asus DS300j G2 Series User Manual page 66

v c S
IewInG ontroller tatIStIcS
To view controller statistics:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the controller you want, then click the View button.
4. Click the Statistics tab.
Controller statistics include:
• Data Transferred
• Read Data Transferred
• Errors
• Read Errors
• I/O Requests
• Read IO Requests
• Statistics Start Time
Note
To clear controller statistics, see "Clearing Statistics" on page 55.
l c
ocatInG a ontroller
This feature causes the controller LEDs to blink for one minute to assist you in locating the controller on a RAID
subsystem or JBOD expansion unit.
To locate a controller:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the controller you want, then click the Locate button.
The controller status LEDs blink for one minute.
60
• Write Data Transferred
• Non-Read/Write Errors
• Write Errors
• Non-Read/Write Requests
• Write I/O Requests
• Statistics Collection Time
v f I I
IewInG the laSh maGe nformatIon
To view the flash image information for the RAID subsystem enclosure:
1. Click the Administration tab.
2. Click the Image Version icon.
3. Click the Enclosure you want to see and click the triangular button.
RAID subsystems have the following components in their flash image:
• Kernel • BIOS
• Firmware • 6G Expander
• Software • System Libraries
• Ramdisk • Applications
• SEP Firmware • Mount Scripts
• OEM Customization • PLX EEPROM Image
• Running – The version that is currently running on the subsystem or expansion unit.
• Flashed – This version was updated but does not run until the subsystem restarts.
See Updating Firmware on a RAID Subsystem.
JBOD expansion units have only one component in their flash image, SEP firmware. It only appears as
running.
DS300f G2 Series User Manual