Asus DS300j G2 Series User Manual page 45

Example:
administrator@cli> net -a mod -f ipv6 -s
"primaryip=2001:0db8:85a3:0000:0000:8a2e:0370:7334,
primaryipmask=2001:0db8:fedc:ba98:7654:3210:0246:8acf
primarydns=2001:0db8:85a3:0000:0000:8a2e:0370:7001,
gateway=2001:0db8:85a3:0000:0000:8a2e:0370:7002"
After a moment, the comand prompt reappears, indicating that your setting was successful.
administrator@cli>
3. To verify the settings, at the command prompt, type net -a list -v and press Enter .
The following information displays:
administrator@cli> net -a list -v
----------------------------------------------------------------------------
ActiveCtrlId: 1 Port: 1
MaxSupportedSpeed: 1000Mbps LinkStatus: Up
ProtocolFamily: IPv4(Enabled)
IP: 10.0.0.1
IPMask: 255.255.255.0
MAC: 00:01:55:61:18:65
DNS: 10.0.0.11
Gateway: 10.0.0.1
ProtocolFamily: IPv6(Enabled)
IP: 2001:0db8:85a3:0000:0000:8a2e:0370:7334
IPMask: 2001:0db8:fedc:ba98:7654:3210:0246:8acf
MAC: 00:01:55:61:18:65
DNS: 2001:0db8:85a3:0000:0000:8a2e:0370:7001
Gateway: 2001:0db8:85a3:0000:0000:8a2e:0370:7002
m m S
aIntenance oDe ettInGS
You also have the option to make maintenance mode settings at a later time in WebPRM PROe.
M M M s – A
Aking AintenAnce ode ettings utoMAticAlly
Automatic settings require a DHCP server on your network. DHCP is currently supported on IPv4 only.
You make maintenance mode settings for one controller at a time.
39
DHCP: Disabled
DHCP: Disabled
To enable automatic maintenance mode settings:
1. At the command prompt, type net -a mod -m -c 1 -f ipv4 -s "dhcp=enable" and press Enter .
administrator@cli> net -a mod -m -c 1 -f ipv4 -s "dhcp=enable"
After a moment, the comand prompt reappears, indicating that your setting was successful.
administrator@cli>
2. To verify the settings changes, at the command prompt, type net -a list -m and press Enter .
The following information displays:
administrator@cli> net -a list -m
----------------------------------------------------------------------------
CtrlId: 1 Port: 1
ProtocolFamily: IPv4(Enabled)
IP: 10.0.0.2
IPMask: 255.0.0.0
MAC: 00:01:55:30:65:E9
DNS: 0.0.0.0
Gateway: 0.0.0.0
CtrlId: 1 Port: 1
ProtocolFamily: IPv6(Disabled)
IP: 2001::2
IPMask: ffff::
MAC: 00:01:55:30:65:E9
DNS: ::
Gateway: ::
CtrlId: 2 Port: 1
ProtocolFamily: IPv4(Enabled)
IP: 10.0.0.3
IPMask: 255.0.0.0
MAC: 00:01:55:30:65:D7
DNS: 0.0.0.0
Gateway: 0.0.0.0
CtrlId: 2 Port: 1
ProtocolFamily: IPv6(Disabled)
IP: 2001::3
IPMask: ffff::
MAC: 00:01:55:30:65:D7
DNS: ::
Gateway: ::
3. Repeat steps 1 and 2 above but change -c 1 (controller 1) to -c 2 (contoller 2).
DS300f G2 Series User Manual
DHCP: Enabled
DHCP: Disabled
DHCP: Disabled
DHCP: Disabled