Epson Stylus Pro 7700 Service Manual page 386

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
5.4.8.2 Adjusting Method
REQUIRED TOOLS
Table 5-2. Tools Required
Tool
Plain Paper (A4) For nozzle check
EPSON Enhanced (Archival) Matte For printing charts
Paper (A4)
Computer Following drivers should be installed beforehand.
Printer driver for this product
USB driver for the calibrator
GretagMacbeth eye-one (i1) With UV filter
(Calibrator)
Calibration plate (White plate) Accessory provided with the calibrator
Scanning ruler (Scale) Accessory provided with the calibrator
USB cable To connect the computer and the calibrator
Black sheet Should be larger than A4
Clear file Required when sending charts
ADJUSTMENT
Application/Specification
Head Related Adjustments
ADJUSTMENT WORKFLOW
The workflow of the adjustment is explained in this section.
Nozzle check
Alignment check
Print calibration chart
Measure color
Write the color ID
Print validation chart
Measure color
Output the result
Figure 5-39. Adjustment Workflow
Revision I
START
Cleaning
END
Confidential
386