Epson Stylus Pro 7700 Service Manual page 278

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
DISASSEMBLING PROCEDURE
1. Remove the Control Panel. (p203)
2. Remove the IC Cover R and the IC Shaft Cover R.
3. Remove the Maintenance Tank R.
4. Remove the Right Cover. (p209)
5. Release the two hooks to remove the Tube Stopper, and pull off the Waste Ink
Tube from the drain outlet of the Maintenance Tank.
6. Release the Waste Ink Tubes from the tube retainer.
7. Pull off the Pressure Tube from the main body, and release the Pressure Tube from
the guide.
DISASSEMBLY & ASSEMBLY
(p206)
(p208)
Disassembly and Assembly Procedure
- Rear right -
FFC
Guide
Tube retainer
Pressure Tube
Figure 4-125. Releasing the FFC, Waste Ink Tube and Pressure Tube
Revision I
Hole
Waste Ink Tubes
Tube Stopper
Hooks
Clamp
278
Confidential