Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
9.
Turn the adjustment dial to adjust the slant of the Printhead.
See the following for the direction of rotation.
C H E C K
P O I N T
Paper Feed
C line is below M line
Direction
Counterclockwise
When turning the dial by 15 to 20 notches, the pattern slides up
or down by the line-height.
Adjustment Dial
Figure 5-33. Adjustment Dial
ADJUSTMENT
10. Tighten the screws (x6) loosened in
11. Close the Front Cover (Middle).
12. Print the adjustment pattern again and check the adjustment result.
13. Repeat
14. After finishing the adjustment, press [OK] while
C line is above M line
the Printhead. Then, turn the printer OFF and finish the adjustment.
Clockwise
Head Related Adjustments
Step
8.
Step 4
to
Step 12
till the adjustment is finished.
Revision I
[Enter] Cap
is displayed to cap
380
Confidential