Epson Stylus Pro 7700 Service Manual page 240

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.4.4 Driven Pulley Unit
1. Remove the Control Panel. (p203)
2. Remove the IC Cover R and the IC Shaft Cover R.
3. Remove the Maintenance Tank R.
4. Remove the Right Cover. (p209)
5. Remove the IC Cover L and the IC Shaft Cover L.
6. Remove the Maintenance Tank L.
NOTE: There is no Maintenance Tank (L) mounted for the Epson Stylus Pro
7700/7710/7700M/7710M/7900/7910/WT7900/WT7910/7890/7908.
7. Remove the Left Cover. (p209)
8. Unlock the Carriage Unit and move it to the center.
9. Disengage the four hooks on the bottom, and remove the CR Belt Cover.
10. Remove the screw that secures the CR Belt to the Carriage Unit.
A) Silver, Phillips, Bind P-tite with S.W & P.W. M4x12: one piece
DISASSEMBLY & ASSEMBLY
(p206)
(p208)
(p206)
(p208)
(p201)
Disassembly and Assembly Procedure
CR Belt Cover
Figure 4-62. Removing the CR Belt Cover
CR Belt
A
Figure 4-63. Removing the CR Belt
Revision I
Hook
240
Confidential