Colorimetric Calibration (Color Id); With Spectroproofer - Epson Stylus Pro 7700 Service Manual

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908

5.4.8 Colorimetric Calibration (Color ID)

with SpectroProofer

NOTE: This adjustment is for Epson Stylus Pro 7900/7910/9900/9910 only.
This adjustment is described in the same manner as other models.
C A U T I O N
Therefore, the procedure is basically the same, but some actual
steps or patterns may differ.
5.4.8.1 Adjustment Overview
This adjustment is required when the user asks to reduce the color gap between the
printers after replacing any of the following parts.
Printhead
Main Board Assy
Power Supply Board Assy
PURPOSE
By registering/controlling information concerning the ink droplets, this product
improves calibration accuracy and ensures stable color quality. (Difference in color
among individual products or each mode is reduced.)
PRINCIPLE
The calibration is performed by measuring a printed correction pattern with a
calibrator. ID information that is calculated based on the acquired color values (L*, a*,
b*) is transmitted to the printer driver, and the printer driver corrects the dot generation
amount for each dot size x each color in the print data.
ADJUSTMENT Head Related Adjustments
Revision I
385
Confidential