Epson Stylus Pro 7700 Service Manual page 243

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.4.6 APG Motor
1. Remove the Control Panel. (p203)
2. Remove the IC Cover R and the IC Shaft Cover R.
3. Remove the Maintenance Tank R.
4. Remove the Right Cover. (p209)
5. Unlock the Carriage Unit and move it to the center.
When having difficulty in removing the screw in the next step, first
C H E C K
remove the plate B shown in
P O I N T
6. Remove the screw that secures the APG Motor Cover, and remove the APG Motor
Cover.
A) Silver, Phillips, Bind S-tite with S.W & P.W. M3x8: one piece
7. Remove the two screws that secure the APG Motor, and remove the APG Motor.
B) Silver, Phillips, Pan S-tite with S.W & P.W. M3x6: two pieces
8. Disconnect the connector from the APG Motor.
DISASSEMBLY & ASSEMBLY
(p206)
(p208)
(p201)
Figure 4-72
. (p244)
Disassembly and Assembly Procedure
APG Motor Cover
A
Figure 4-69. Removing the APG Motor (1)
Connector
APG Motor
B
Figure 4-70. Removing the APG Motor (2)
Revision I
APG Motor
243
Confidential