Epson Stylus Pro 7700 Service Manual page 227

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
8. Disconnect the two connectors (CN408, CN409) on the Ink Holder Board Assy L.
9. Release the harness from the two hooks and the tape.
When removing the screws in the next step, use a stubby driver or a
C H E C K
P O I N T ratchet screw driver.
10. Remove the two screws, and remove the Cartridge Cover Sensor L.
C) Black, Phillips, Bind P-tite M3x10: two pieces
DISASSEMBLY & ASSEMBLY
See Figure 4-46.
Disassembly and Assembly Procedure
- Left side -
Ink Holder Board Assy L
Connectors
Hooks
Tape
Cartridge Cover Sensor L
Figure 4-46. Removing the Cartridge Cover Sensor L
Revision I
C
227
Confidential