Epson Stylus Pro 7700 Service Manual page 267

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
9. Remove the two screws that secure the AID Board Cover, and remove the AID
Board Cover.
A) Silver, Phillips, Bind machine screw M3x8: two pieces
10. Disconnect the connector (CN2) on the AID Board.
After installing the AID Board Cover, check the status of the cable
connected to the CN2 on the AID Board, and if the black and white
cables can be seen, place the white one over the black one.
<Black and white cables are hidden>
No treatment required
DISASSEMBLY & ASSEMBLY
<Black & white cables can be seen>
Place the white over the black
Disassembly and Assembly Procedure
- Top right -
AID Board Cover
Figure 4-109. Removing the AID Board Cover
- Top right -
AID Board
Figure 4-110. Disconnecting the connector on the AID Board.
Revision I
A
CN2
267
Confidential