Epson Stylus Pro 7700 Service Manual page 59

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
Top Menu Menu Item
ROLL PAPER MARGIN
PRINTER SETUP
ROLL PAPER
MARGIN
PAPER SIZE CHECK
PRODUCT DESCRIPTION
Table 1-8. Menu Mode Settings List
Settings
(shaded one is the default)
DEFAULT
Epson Stylus Pro 7900/7910/9900/9910/9890/9908/7890/7908
TOP/BOTTOM 15mm
Sets the margins for roll paper.
TOP 35/BOTTOM 15mm
When the Default is selected, the top margin becomes 20mm and the bottom margin becomes 15mm for the
following paper types; Premium Glossy Photo Paper(250), Premium Semigloss Photo Paper(250), and Premium
15 mm
Luster Photo Paper(260).
3 mm
DEFAULT
TOP/BOTTOM 15mm Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710
Sets the margins for roll paper.
TOP 35/BOTTOM 15mm
When the Default is selected, the top margin becomes 20mm and the bottom margin becomes 15mm for the
TOP 45/BOTTOM 15mm
following paper types; Premium Glossy Photo Paper(250), Premium Semigloss Photo Paper(250), and Premium
Luster Photo Paper(260).
3 mm
15 mm
DEFAULT
Epson Stylus Pro WT7900/WT7910
TOP 15/BOTTOM 35mm
Sets the margins for roll paper.
TOP 35/BOTTOM 15mm
When the Default is selected, the top margin of Premium Glossy Photo Paper (250) is 20 mm and the bottom
3 mm
margin is 15 mm. The top and bottom margin of other paper is 15 mm.
15 mm
Sets whether to detect the paper width or not.
ON
Setting to OFF deactivates the sensor that detects the paper width when paper is loaded on the printer. This
allows the user to use paper whose width is out of the sensor's detectable range. It means that the user can print
OFF an image larger than the paper size. The user should know that doing so soils the platen and may cause a print
quality or any other trouble.
Control Panel
Explanation
Revision I
Applied
model
√
√
√
√ √
59
Confidential