Epson Stylus Pro 7700 Service Manual page 317

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
5. Disconnect the connector (CN17) on the Main Board.
6. Remove the four screws that secure the Take-up Reel Switch, and remove the
Take-up Reel Switch from the Panel Cover.
B) Black, Phillips, Bind P-tite screw M2x7 (bit: No.1): four pieces
Install the Take-up Reel Switch with the "ON/OFF/ON"
inscription to the right. And install the Take-up Reel Switch
with "M" inscription to the Manual side.
DISASSEMBLY & ASSEMBLY
Inscription
Disassembly and Assembly Procedure
Panel Cover
Take-up Reel Switch
B
B
Figure 4-178. Removing the Take-up Reel Switch
Revision I
Main Board
CN17
317
Confidential