Epson Stylus Pro 7700 Service Manual page 387

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
ADJUSTMENT PROCEDURE
1. Turn the printer power on.
2. Start the Service Program, and select [Colorimetric Calibration Tool].
3. Click [Run] to start the "Colorimetric Calibration Tool".
4. Select the printer model.
When several drivers are installed for one printer, check that the
C A U T I O N
backlight of the LCD panel on the printer flashes by selecting the
printer model and click [Next].
5. Make sure that the "READY" message is displayed on the printer LCD, and click
[Next].
If the printer has not been used for more than two weeks, it is
C H E C K
P O I N T recommended to agitate the ink inside the cartridges to get an
accurate result. Remove all the ink cartridges from the printer, and
shake them gently for four or five times.
ADJUSTMENT
Figure 5-40. Colorimetric Calibration ID Startup Screen
Head Related Adjustments
Revision I
387
Confidential