Epson Stylus Pro 7700 Service Manual page 120

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
No. Message on LCD
52 SpectroProofer ERROR
REFER TO THE MANUAL TO FIND OUT HOW
TO SOLVE THE PROBLEM
NN
*NN is the error number.
53 SProofer DISCONNECTED
SpectroProofer IS DISCONNECTED
DO YOU CONTINUE?
NO
YES
54 DEVICE ALIGNMENT
ADJUSTMENT NOT COMPLETE
55 ILS20EP DISCONNECTED
ILS20EP IS DISCONNECTED
DO YOU CONTINUE?
NO
YES
56 MAINTENANCE REQUEST
NNNN
*NNNN is the error number.
MAINTENANCE REQUEST
CODE NNNN
REFER TO THE MANUAL
*NNNN is the error number.
TROUBLE SHOOTING
Description
See 3.4 "Remedies for Error Messages related to SpectroProofer/Auto Take-up Reel"
The SpectroProofer is not connected to the printer properly. Select NO, and then turn the printer off, and then connect the
The SpectroProofer is not recognized.
The initial settings have not been made for the
SpectroProofer.
The color measurement device (ILS20EP) is not connected
properly.
See 3.4 "Remedies for Maintenance Requests"
Remedies for Error Messages
Remedy/Points to be checked
(See
SpectroProofer to the printer properly. If you select YES, the printer
continues printing.
Check the connection between the Mount Sensor and the Main Board
Assy.
Replace the Mount Sensor with a new one.
Refer to the user's guide to make initial settings to the SpectroProofer.
Select NO, and turn the printer off. Then re-connect the color
measurement device (ILS20EP) properly. If you select YES, the printer
continues printing.
(See P.129).
Revision I
P.123).
(See P.338)
120
Confidential