Ink Holder Board Assy R - Epson Stylus Pro 7700 Service Manual

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908

4.4.6.8 Ink Holder Board Assy R

1. Remove the Control Panel. (p203)
2. Remove the IC Cover R and the IC Shaft Cover R.
3. Remove the Maintenance Tank R.
4. Remove the Right Cover. (p209)
5. Unlock the Carriage Unit and move it to the center.
The next step is not necessary when the Ink Cartridge Holder R is
C H E C K
already removed.
P O I N T
6. Remove the Ink System Unit. (p266)
7. Pull off the Pressure Tube from the main body.
Make sure to connect the Pressure Tube.
8. Release the Pressure Tube from the guide of the Board Cover.
9. Pull out the Pressure Tube from the hole of the Board Cover.
10. Disengage the two hooks, and remove the Board Cover.
DISASSEMBLY & ASSEMBLY
(p206)
(p208)
(p201)
Disassembly and Assembly Procedure
Hooks
Board Cover
Figure 4-144. Removing the Board Cover
Revision I
Hole
Guide
Pressure Tube
Confidential
292