Epson Stylus Pro 7700 Service Manual page 262

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
Since the hooks of the EJ Roller are fragile, do not apply excessive
C A U T I O N
force to them in the next step.
3. Release the two each hooks that secure the EJ Rollers, and remove the EJ Rollers.
4. Disconnect the relay connector.
5. Release the harness from the clamp.
6. Remove the three screws that secure the Suction Fan.
B) Silver, Phillips, Round Washer Head P-tite M3x12: three pieces
7. Remove the Suction Fan.
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or removing the Suction Fan.
<Adjustment Item>
1. Suction Fan Operation Check
DISASSEMBLY & ASSEMBLY
(see p351) and perform
Disassembly and Assembly Procedure
EJ Rollers
Suction Fan
Figure 4-101. Removing the Suction Fan
Revision I
Relay Connector
Hook
B
Clamp
262
Confidential