Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
13. Remove the six screws that secure the Ink Cartridge Holder Mounting Plate, and
remove the Ink Cartridge Holder Mounting Plate.
B) Silver, Phillips, Round Washer Head S-tite M4x8: four pieces
C) Silver, Phillips, Round Washer Head S-tite M3x6: two pieces
Secure the Ink Cartridge Holder L together with the grounding
wire using the same screw shown in the figure.
14. Remove the four screws that secure the Ink Cartridge Holder L.
D) Silver, Phillips, Round Washer Head S-tite M4x6: four pieces
15. Remove the Ink Cartridge Holder L.
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing the Ink Cartridge Holder L.
<Adjustment Item>
1.
Counter Clear (IH Absorber)
2.
Ink Holder Adjustment
3.
Air Leak Check for Ink Supply Sys.
DISASSEMBLY & ASSEMBLY
(see p351)
and perform
Disassembly and Assembly Procedure
- Left side -
Ink Cartridge Holder Mounting Plate
Ink Cartridge Holder L
Figure 4-141. Removing the Ink Cartridge Holder L
Revision I
Screw
together
B
C
D
289
Confidential