Philips SOPHO 2000 IPS User Manual page 160

A
CM8A For area code addition, designate the digits to
be added.
To delete the designated digit of an area code
assigned by CM8A Y=4005-4007.
NOTE:
When originating a call, the digit number of SETUP message to ISDN is as follows:
The digit number of SETUP message
=[20 digits]-[Number of digit deletion (2nd data set by CM8A Y=5000-5255>153)]
For example, when CM8A Y=5000-5255>153 is set to 02 (2 digits area code deletion) and
a calling station dials number "0-1234567890123456789012345* (26 digits)", ISDN
message sent from the system becomes as follows.
ISDN message:SETUP message: 345678901234567890 (18 digits)
*: Header 0 is LCR access code for LCR Group 0 set by CM20>A126, and following num-
ber 12 is an area code.
Assign the sending an area code to ISDN as a
Called Party Subaddress.
B
DESCRIPTION
INFO message: 12345 (5 digits)
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=5000-5255
(1) 100: Designation of digit Addition Pattern
No.
(2) 9000-9255: Digit Addition Pattern No.
CCC
• Y=9000-9025: Digit Addition Pattern No.
(1) 0
(2) X-X...X: Digits to be added
• Y=5000-5255
(1) 153: Designation of digit to be deleted from
area code assigned by CM8A
Y=4005-4007
(2) 00 : No digit deletion
01-10 : Leading 1-10 digits deletion
CCC : No digit deletion
• Y=5000-5255
(1) 155: Designation of sending area code as a
Called Party Subaddress
(2) 0: Available
– 146 –
ISDN FEATURE PROGRAMMING
DATA
000-255
: No digit addition
000-255
(Maximum 32 digits)
NWA-008852-001 Rev.5.0
JANUARY/31/2006
98ch3001.fm